Effect of Initial Grain Size on Microstructure and Mechanical Properties of Extruded Mg-9Al-0.6Zn Alloy

초록

The effect of initial grain size on the microstructural evolution and tensile properties of an extruded Mg-9Al-0.6Zn alloy was investigated using homogenized billets with grain sizes of 411 and 87 mu m. It is found that although dynamically recrystallized (DRXed) grains remain the same size regardless of the initial grain size, a finer-grained billet results in a significant reduction of the size and area fraction of un-DRXed grains through an increase in grain boundaries capable of acting as nucleation sites for DRX during hot extrusion. This increase in the fraction of DRXed grains, combined with more precipitates, improves the tensile yield strength of the extruded alloy. The elongation is also significantly improved, as the reduction in unDRXed grains suppresses the formation of twins that cause micro-cracks. This increased ductility subsequently results in an increase in ultimate tensile strength through continuous strain hardening. (C) The Minerals, Metals & Materials Society and ASM International 2015

키워드