Experimental Study on Structural Performance of New Steel-Concrete Composite Beam for Both Long-Span and Low-Height Parking Structures

Citations

WEB OF SCIENCE

5
Citations

SCOPUS

5

초록

Parking structures taller than 8 m in height are difficult to design because both fire resistance and seismic resistance must be considered, whereas structures shorter than this threshold are simpler to design and are subject to fewer construction restrictions. Therefore, to optimize the design of these low parking structures, we propose a novel wide, long-span, steel-concrete composite beam that can be applied to reduce their story height. We investigated flexural and shear-bonding performance of the developed composite beams based on experiments, as well as theoretical and analytical research. Seven flexural beams were loaded at two supports prior to monotonic bending tests, and four shear bonding beams were tested using compressive loading schemes. As a result of the flexural tests indicated that the flexural strength of the wide composite-steel beams increased by approximately 20% as steel thickness increased by 3 mm (from 6 to 9 mm). Shear-bonding tests showed that all specimens without shear connectors exhibited insufficient shear-bonding strength to resist the mechanical bond mechanism; therefore, they should be reinforced with two or more flat bars. As a result, the novel composite beam system can be applied to reduce construction costs and resources by decreasing floor height in systems with long-span beams.

키워드

Long spanLow storyFlexureParking structureShear bondingSteel-concreteWide composite beamCELLULAR BEAMBEHAVIORDESIGN
제목
Experimental Study on Structural Performance of New Steel-Concrete Composite Beam for Both Long-Span and Low-Height Parking Structures
저자
Choi, Yun-ChulLee, Bok-GiLee, Kang-SeokPark, Keum-SungJung, Ju-Seong
DOI
10.1007/s13296-022-00702-2
발행일
2023-04
유형
Article
저널명
International Journal of STEEL STRUCTURES
23
2
페이지
417 ~ 430