Removal of organic wax and particles on silicon after batch type polishing by ozonated DI water

초록

To manufacture the wafer used for device chip, several polishing and cleaning process are required. In this study, new concept cleaning process was developed with ozonated DI water (DIO3) to achieve low COO (cost of ownership). Ozone concentration of 55 ppm is used to remove the wax film and particles. A commercial dewaxer was combined with DIO3 to reduce dewaxing time and SC-1 steps. DIO3 rinse resulted in less than 50 Å of wax thickness while DI water rinse did thicker than 300 Å. Replacing DI rinse with DIO3 rinse resulted in lower contact angle and completely hydrophilic surface. Optical images of surfaces treated with DIO3 showed thinner wax layer which indicates no further cleaning steps required. Particle removal efficiency improved further by combining SC-1 cleaning step with DIO3 rinsing process. © The Electrochemical Society.

키워드