Fabrication of 4 x 1 signal combiner for high-power lasers using hydrofluoric acid

초록

We report a new method to fabricate a 4 x 1 signal combiner that comprises an output fiber port and a tapered fused bundle (TFB) with four input fiber ports. The TFB is etched in a solution of hydrofluoric acid and spliced with an output fiber of core diameter 105 mu m and cladding diameter 125 mu m. Each cladding of the four input optical fiber is etched to approximately 72.5 mu m. The etched TFB was fabricated by tapering after forming a bundle of four etched optical fibers. Subsequently, the 4 x 1 signal combiner is fabricated by fusion splicing between the fabricated TFB and output optical fiber with a numerical aperture of 0.15. The efficiency of each port of the fabricated 4 x 1 signal combiner is in the range of 93.3-98.3%. When an optical power of approximately 624.5 W was input to the signal combiner, the maximum output was similar to 612 W and the efficiency was similar to 98%. The beam quality factor, M-2 is measured to be approximately 14.6, which is calculated as the beam parameter product (BPP) of 5.02 mm.mrad. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

키워드